翻訳と辞書
Words near each other
・ Sheffield City Centre
・ Sheffield City Council
・ Sheffield City Council election, 1973
・ Sheffield City Council election, 1975
・ Sheffield City Council election, 1976
・ Sheffield City Council election, 1978
・ Sheesh Mahal
・ Sheesh Mahal (1950 film)
・ Sheesh Mahal (Lahore Fort)
・ Sheesh Mahal Cricket Tournament
・ Sheesh! Cab, Bob?
・ Sheesha (1986 film)
・ Sheesha (2005 film)
・ Sheet
・ Sheet (sailing)
Sheet bend
・ Sheet cake
・ Sheet explosive
・ Sheet film
・ Sheet Harbour 36
・ Sheet Harbour Consolidated School
・ Sheet Harbour Road, Nova Scotia
・ Sheet Harbour, Nova Scotia
・ Sheet Hedges Wood
・ Sheet Hill
・ Sheet intrusion
・ Sheet metal
・ Sheet Metal and Air Conditioning Contractors' National Association
・ Sheet metal forming analysis
・ Sheet metal forming simulation


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Sheet bend : ウィキペディア英語版
Sheet bend

The sheet bend (also known as becket bend, weaver's knot and weaver's hitch) is a bend, that is, a knot that joins two ropes together. Doubled, it is effective in binding lines of different diameter or rigidity securely together, although it has a tendency to work loose when not under load.
The sheet bend is related in structure to the bowline. It is very fast to tie, and along with the bowline and clove hitch is considered so essential it is knot №1 in the ''Ashley Book of Knots''. It is a more secure replacement for the reef knot (square knot), especially in its doubled variety.〔Cassidy 1985, ''The Klutz Book of Knots''〕
The "weaver's knot" takes its common name from its historic use in textile mills. Even in modern operations, weavers are taught to use this particular knot when correcting broken threads in the warp. In practice, weavers are taught to be able to tie the knot in as little time possible, with the mean average being no more than three to five seconds.
==Method==

The sheet bend may be tied by various methods: the basic "rabbit through the hole" method of forming a half hitch in the bight of the larger rope, by a more expedient method shown in Ashley as №1431 (similar to the method used by an experienced sailor or mountaineer to tie a bowline) or by a trick method, Ashley №2562, involving upsetting a noose knot over a short end of the "larger" rope. (Lines of equal size may be joined with a sheet bend, of course, but when one is larger, it plays the simpler role of the red line shown in the infobox, rather than forming the nipped hitch as the green line does.)
One type of weaver's knot is topologically equivalent to a sheet bend, but is tied (usually in smaller stuff) with a different approach. Sheet bends are also used for netting.
Notice that, to have any strength, the two free ends should end up on the same side of the knot〔(【引用サイトリンク】title=Knots and Splicing )〕 (see below). Under even moderate load, a left-hand sheet bend will quickly slip and release completely.

Image:Schotstek rechts.jpg|Secure
Image:Schotstek links.jpg|Insecure (Left-hand sheet bend〔Clifford W. Ashley, ''The Ashley Book of Knots'' (New York: Doubleday, 1944), #67 and #1432〕)


抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Sheet bend」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.